Category: SAE

Tests and Procedures for Carbon Steel and High Strength, Low Alloy Steel Tubing
standard by SAE International, 09/08/2022

AS60500-599 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, .4375-20 UNJF-3A
standard by SAE International, 10/26/2022

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr – 12Ni – 2.5Mo (316) Solution Heat Treated
standard by SAE International, 10/07/2022

Fluorocarbon Elastomer (FKM) High Temperature/HTS Oil Resistant/Fuel Resistant Low Compression Set/70 to 80 Hardness, Low Temperature Tg -22 oF (-30 oC), for Seals in Oil/Fuel/Specific Hydraulic Systems
standard by SAE International, 09/08/2022

Aluminum Alloy, Rolled or Forged Rings 6.3Cu – 0.30Mn – 0.18Zr – 0.10V – 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved(STABILIZED Nov 2022)
standard by SAE International, 11/14/2022

Combined Cornering and Braking Test for Truck and Bus Tires
standard by SAE International, 03/01/2023

Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu – 7.0Al – 1.8Si Drawn and Stress Relieved (HR50)
standard by SAE International, 03/08/2023

Vehicle Power and Rated System Power Test for Electrified Powertrains
standard by SAE International, 01/17/2023

Titanium Alloy Bars, Forgings and Forging Stock, 8Al – 1Mo – 1V, Duplex Annealed
standard by SAE International, 08/19/2022

Steel, Corrosion- and Heat-Resistant, Welding Wire 29Cr – 9.5Ni
standard by SAE International, 01/17/2023